Maintaining privacy and keeping data secure are hugely important for any Mac user. Yet many of us give it scant attention and do little more than the bare minimum, if anything at all to ensure that hackers, opportunists and, yes, even the authorities, are able to access as little of our personal data as possible.
Yet, macOS makes securing your data very simple, thanks to a host of tools in System Preferences and Safari, and several third party apps.
There are three places threats to your data are likely to come from: over the internet, via an email, or from someone with direct access to your Mac. Taking steps to protect yourself will minimise the risks.
We'd normally recommend when it comes to Mac security is to make sure the macOS software is up-to-date, however, from time to time Apple has been caught out by security flaws in the Mac operating software, such as the High Sierra Root bug that made it possible for a hacker to access all the settings on a Mac just by logging in as root in System Preferences. Luckily this flaw has since been fixed in an update to macOS, but you can read about the steps you could take to protect yourself from the High Sierra root bug here.
It is wise to update macOS when Apple issues security updates, such as on 22 January 2019 when the company issued an update to macOS that addressed vulnerabilities that could allow your Mac to be hacked. More information here: How to stop your iPhone, iPad or Mac getting hacked.
Apple normally reacts quickly when Mac malware surfaces, and has various measures in place to guard against threats, as we explain in this article about how Apple protects you from malware. However, from time to time malware may appear and it may be necessary to make changes to the way you use your Mac while waiting for the necessary protection. For example, the advice regarding the Mac CookieMiner malware in January/February 2019 was to clear Chrome browser caches after logging in to financial accounts. There is more advice on the CookieMiner malware here.
We will go through the various Mac security settings you can use to protect your Mac in the article below. If you are still concerned, we have a round up of the best Mac antivirus apps here.
Additional reporting by Kenny Hemphill
Security & Privacy settings
Let's start with the basic Mac settings you should be checking to ensure security is watertight.
To familiarise yourself with the controls, pay a visit to the Security & Privacy pane in System Preferences. Here, you'll find four tabs that control various aspects of security.
- Open System Preferences. You can get to System Preferences from the Apple menu in the top left of your screen. (We have a complete guide to System Preferences here).
- Click on Security & Privacy.
- You'll see tabs for General, FileVault, Firewall and Privacy.
- To change any of these settings you'll need to click on the padlock at the bottom of the screen and type in your user name and password.
If you have an administrator account, you'll be able to make changes that affect the whole Mac, if not they'll only apply to your account.
We will look at the various changes you can make here to secure your Mac below.
Turn on the Firewall
The first step to securing any Mac is enabling the firewall, which blocks any unwanted incoming network connections. You might think the firewall is enabled by default but it often isn't. (And, no, we have no idea why not.) Luckily, enabling it is dead easy and doing so is entirely wise.
Here's how to turn on the Firewall on a Mac
- Click the Firewall tab in the System Preferences > Security & Privacy pane we just opened.
- Click the padlock icon at the bottom left to unlock system settings (you'll need to type your login password when prompted).
- Click the Turn On Firewall button.
- Then click the Firewall Options button and, in the dialog box that appears, click the Enable Stealth Mode box. This last step means your computer will be largely invisible on public networks, such as shared Wi-Fi in a cafe.
- In the Firewall tab, click Firewall Options to make changes. Here, you'll see a list of apps and services which are able to receive inbound connections. To add one to the list, if, say you try to run an app and it displays an error telling you it has been prevented from accepting an inbound connection, click the '+' beneath the list.
It's important to note that macOS's Firewall, while useful, offers only limited protection from malware. That's because it shields you from inbound traffic only. Its job is to limit which apps and services can accept incoming connections. It doesn't provide any control over outbound connections ie apps and services which initiate connections. So, for example, if you download a piece of malware, OS X's Firewall won't stop it connecting to the internet.
Some people choose to block outgoing network connections too so that certain apps can't "phone home" without their knowledge. This also means accidentally installed malware is unable to leak your data without you being made aware.
However, as we said, OS X/macOS offers no built-in way of blocking outgoing connections. Luckily third-party apps like Little Snitch (circa £30) and Hands Off (£38.95), or an outbound firewall found in anti-malware tools from the likes of Intego, Sophos and Norton, will do the job with aplomb.
Use a password
Let's go back to the first tab in the Security & Privacy pane: the General section.
There are three settings here you should pay attention to:
The first is the one that allows you to set a password for your account if you haven't already done so, or change your password if you think it's necessary. You should have a password (we have a guide to creating a good password here).
The next allows you to specify if a password is needed to unlock your Mac when it goes to sleep or a screen saver begins. You can choose to do so immediately, or at different increments of time following the sleep or screen saver starting. If you work in an office with other people, you should consider switching this setting on.
There's also an option to Disable automatic login, which you should do - you would have to be exceptionally lazy and unconcerned about security not to use this setting, but if you did then you wouldn't have to enter your password when you start up your Mac. You should check this, particularly if you use a mobile Mac. If your Mac gets stolen, you don't want the thief to be able to access your data.
You can also choose to Allow your Apple Watch to unlock your Mac, assuming you have an Apple Watch. With this option selected all you need to do it be wearing your Apple Watch (and for the Watch to be unlocked) and your Mac will automatically unlock when you are nearby. (You won't be able to use this setting if you have Internet Sharing turned on though).
While we're on the subject of passwords, we'll remind you that good passwords should be difficult to remember. They should also not be written down. That, of course, presents a problem, particularly if you don't want Safari to auto-complete them.
The solution is a password manager: you could try 1Password (£3.99 a month) or Dashlane (£38.99 a year), or check out our list of the best Mac password managers. These apps allow you to create and store robust passwords and sync them across all your devices. Crucially, however, they encrypt the data and allow allow access when you type in the master password.
For more ideas, read: How to choose a strong password, what is a good password
App download preferences
At the bottom of the General screen are two options relating to which apps can run on your Mac.
The safest, but most limiting option, is to only allow apps from the App Store to run. The other option is a good compromise, allowing you to run apps from the App Store and from developers known to Apple.
In older versions of MacOS there was an option to allow apps from Anywhere. If you have this option we would advise against using it.
You will be able to run an app that doesn't come from the App Store or an identified developer, but you will have to approve it before it will run.
Here's how to open an app from an unidentified developer if you do want to do that.
Turn on FileVault
With FileVault turned on all the files in your user account will be encrypted.
To decrypt them, you'll need to type in either your account password or the recovery key created when you switch FileVault on.
For most users, the inconvenience of having to type in a password to open a file, together with the time it takes initially to encrypt all the files on your Mac, outweighs the security advantages.
But if you have reason to keep data as secure as it can be, switch it on.
Check your privacy settings
The last tab, Privacy, covers a number of different controls and settings. These are listed in the window on the left of the pane.
Location Services allows you to control which apps have access to your location data. You can switch Location Services off completely here, or prevent individual apps from accessing data.
Likewise, Contacts, Calendar, and Reminders allow you to specify which apps on your Mac can access the information stored in those core OS X apps.
If you click on Photos you'll see all the apps that have requested access to your Photos library.
If you've added your Twitter, Facebook, and LinkedIn details to the Internet Accounts System Preferences pane, you can control which apps have access to those accounts here.
Then there's the Accessibility section. Despite sharing a name, this, confusingly, has nothing to do with the settings available in the Accessibility pane in the main System Preferences window. Here, you can control which apps are able to control your Mac in some way. For example, Deeper and Onyx allow you change settings which would normally require Terminal commands. To use them, you'll need to enable them here.
Finally, an option added in macOS High Sierra was Analytics, which allows Apple and app developers to improve their products based on data gathered about your use of their apps. You can choose not to share this data here.
Read next: How private is your iPhone data?
Check Safari privacy settings
Away from System Preferences, Safari has several settings that allow you to control privacy.
The first is New Private Window, from the File menu (or Shift+command+N), which allows you to visit websites, without a record of where you go being stored in the History menu, or anywhere else on your Mac.
The second is Clear History, in the Safari menu, which if you click it periodically, erases cookies and other cached data from the sites you visit and removes them from the History menu.
In Safari's Preferences, the Privacy section allows you to prevent websites tracking you, and control which sites can store cookies on your Mac.
It used to be possible to specify how your location data is made available from this window, but since High Sierra these settings have been addressed under a separate tab, in Websites > Location. Here you can choose to set Safari to always deny location information, or allow specific websites to access your location.
And if you're concerned about storing website username and passwords, or personal data, go to the Auto Fill and Passwords sections and uncheck the boxes that enable those services.
Check what you're sharing
Your Mac is able to share files with other Macs, and can share data in various other ways too - including sharing the whole screen to facilitate remote working. Once a sharing service is enabled it's like fitting a new door or window to your house
Yes, that door or window might be considered secure - people will need a password to utilise screen sharing, for example - but there might be a flaw in the door or window that makes it not quite as impenetrable as you might think. In simple terms, it's a good idea to turn off any sharing service you're not using, and the majority of Macs used in the home environment should have all sharing services turned off.
Here's how to turn off sharing:
- Open System Preferences.
- Click the Sharing icon.
- Go through the list on the left, and look closely for any ticks in the boxes beneath the On heading.
- Remove any ticks you see but if in doubt take a look at the following list to make absolutely sure you're OK disabling that particular sharing service.
Screen Sharing & File Sharing
Screen sharing: Used mostly in corporate environments to let tech support workers see or control your screen, and perhaps perform repairs/updates. Windows and Linux computers can also use it to control your Mac's screen via VNC. Not heard of VNC, not in a corporate environment, and never access your Mac remotely? Ensure it’s turned off.
File sharing: Lets other computers on the network access your computer's file system, including Linux and Windows computers - technically speaking, it enables Windows File Sharing (SMB), Apple Filing Protocol (AFP), and Network File Service (NFS). Notably, the file sharing system is also used by the Back To My Mac service, which is part of iCloud and allows you to access your Mac's files from another Mac via the internet (although it has absolutely nothing to do with iCloud Drive, which performs a similar function). If you're not sharing files across the network, and not using Back To My Mac, then this option should be switched off.
Printer Sharing, Remote Login and Remote Management
Printer sharing: Shares any printer connected to your Mac with other computers on the network, again including PCs. Should be turned off if you're not sharing your printer, or if you don't even have a printer attached to your Mac.
Remote login: Allows connection to your Mac via SSH/SFTP, and mostly used by techies to work at the command-line when away from their Macs. Should be turned off if that description doesn't apply to you - and we're pretty sure it won't!
Remote management: Used in the corporate environment to let administrators access your Mac to do things like perform upgrades, or make fixes. Should be turned off in all other circumstances.
Remote Apple Events, Internet Sharing, Bluetooth Sharing and Content Caching
Remote Apple Events: One of Apple's many Good Ideas From Long Ago, this lets one Mac control another to print, or do just about anything, in fact, thanks to tie-ins with AppleScript, at one point a cool joke among Mac fans was to use Remote Apple Events to make another Mac speak, via speech synthesis.
The user of that Mac would be scared half to death when his computer seemingly came to life. However, if you need Remote Apple Events in our modern age then you’ll already know all about it. The rest of us can switch it off without worry.
Internet sharing: Lets one Mac share a Net connection with other Macs. This was created in the days of dial-up internet. It's extremely unlikely to be used now that broadband, Wi-Fi routers and home networking are the norm, so should be switched off.
Bluetooth sharing: Lets a Mac send and receive files to and from another Bluetooth-enabled device, such as a mobile phone. iPhones and iPads can't share files this way, so you're only likely to use it if you've got an Android phone. You'll find guides online telling you how to do this. However, in all other situations this option should be turned off.
Content Caching: A new option in High Sierra is to turn your Mac into an iCloud server that stores iOS updates on your Mac so that you don't have to download them directly from Apple to each of your devices - instead your devices just sync with your Mac and download them from there. That could speed up the process of updating your devices, as you won't have to download the update multiple times over what could potentially be a slow Wi-Fi connection. Content Caching can also be used for iCloud documents, photos and app downloads.
Apply a firmware password
Mac OS X/macOS turns on FileVault encryption by default nowadays, which means the entire boot disk is encrypted and impossible to access unless it's unlocked at login via the user's password.
However, that doesn’t stop somebody using a USB memory stick to boot the Mac and potentially wipe all the data from the hard disk, or simply reinstall OS X/macOS.
The solution is to apply a firmware password. Unlike with a PC's so-called BIOS password, the Mac's firmware password prompt will only appear if anybody tries to boot your Mac in a non-standard way, which is to say, via a USB stick, or if they try and boot to the Recovery Console. Most of the time you won't see the password prompt.
In fact, it's from the Recovery Console that you'll need to activate the firmware password, so restart the computer and, just before the Apple logo appears, press and hold down Command+R. When the boot-time progress bar appears you can lift your fingers from the keyboard. Read all about booting in Recovery mode here.
Select your language and location when prompted, then click the Utilities > Firmware Password Utility menu item. Follow the instructions. Be extremely careful here! If you forget the firmware password then only Apple can unlock your computer. This is probably why this feature is optional!
Enable guest user
If you know anything about computer security you might be wondering if we've gone mad: we're asking you to enable the guest user? Doesn't that let anybody who's stolen your Mac actually use it?
Well, it's more that we're asking you not to turn it off, because it's a vital tool within the Find my Mac service, which is a part of iCloud that lets you attempt to track down a lost or stolen Mac.
Apple says the following: "The guest account works with the Find My Mac feature of iCloud, which can help you find your Mac if you lose it. You can locate your Mac if someone finds it, logs in as a guest, then uses Safari to access the internet."
So, don't turn off the Guest account if you have Find my Mac enabled in iCloud. To check, open System Preferences, click the iCloud icon, and then ensure there's a tick alongside Find My Mac at the bottom of the list at the right.
Check you have Guest User enabled by going to System Preferences > Users & Groups.
We have a complete guide to using Find my Mac to find a lost of stolen Mac here.
Disable the FileVault 'Security Hole'
Those who take computer security very seriously indeed point out that, when your Mac enters sleep mode (if you close the lid of a MacBook Pro, for example), there's a potential security hole in the fact that the password required to decrypt FileVault is stored in memory.
In theory somebody could wake the computer and somehow - and we genuinely don't know how - retrieve this key, and thereby have access to the entire disk's contents without the need for a login password.
The only people out there likely to take advantage of this are government agencies that employ extraordinarily clever people and have unlimited budgets. It's certainly too difficult for a burglar who steals your Mac to exploit, or a nosey colleague.
However, if you’re truly security paranoid then here’s how to stop the FileVault key being stored in memory. The only actual difference this will make in everyday use of the Mac is that sometimes you’ll be prompted to type your login password twice when waking your Mac, and your Mac will be a little slower when waking from sleep mode.
We need to do two things. First we need to switch the Mac to enter standby mode, rather than sleep mode, whenever you do something like close the lid of a MacBook Pro. In Standby mode the contents of memory are saved to disk and the computer put into a deep sleep mode that uses only a trickle of power.
Secondly, we need to tell the computer to not hold the FileVault key in memory while in Standby mode.
Both these two steps can be achieved by opening a Terminal window (you’ll find it in Utilities folder of the Applications listing in Finder) and then pasting in the following:
sudo pmset -a destroyfvkeyonstandby 1 hibernatemode 25
To turn off this feature, and renable the security "hole", again open Terminal and type the following:
sudo pmset -a destroyfvkeyonstandby 0 hibernatemode 3
Check for persistent apps
Some apps on your Mac are designed to start invisibly each time you boot, and remain invisible while you're using the computer. These are called persistent apps, and examples include the update checker apps that Google and Microsoft install to ensure Google Chrome and Microsoft Office are always up to date. Adobe installs a handful of persistent apps too as part of the Creative Cloud package.
However, malware also uses persistent apps to do their nastiness without you noticing and, to make matters worse, there are many locations in the file system where malware can hide in order to have itself started at each boot-up. We could advise you to keep an eye on each and every location, but it's a mammoth task.
Luckily, there are two free apps that'll do a lot of the hard work for you. KnockKnock scans these locations and will tell you what's there. It's not a malware scanner, so won't tell you if what you find is dangerous or not.
That's between you and a search engine, although a helping of common sense will do no harm - for example, the aforementioned apps for Microsoft, Google and Adobe apps are easy to spot (although as a caveat we suppose we ought to point out that it’s possible some malware might masquerade as an app from one of these companies).
The second app is from the same clever people who make KnockKnock, and it's called BlockBlock. This runs in the background of your Mac via a menu bar icon and monitors all the locations in which persistent apps install themselves.
If any app attempts to install persistently then a pop-up dialog box will appear telling you, and it’s down to you whether you allow it or ban it. Again, BlockBlock is not an anti-malware tool so doesn't know what's legitimate or not. That's for you to work out. But as forms of malware protection both KnockKnock and BlockBlock are pretty darned effective.
Scan for malware
Although it's true there's more malware targeting Macs these days, we're still nowhere near the tidal wave that Windows users face on a daily basis. This is also true of the malware attack that crippled the NHS - it targets only Windows PCs.
Because of this, and because OS X/macOS already features a powerful, always running yet invisible anti-malware tool called Xprotect, we reckon that antimalware software is still not a standard requirement for a Mac.
However, for peace of mind you can occasionally fire up an app like Bitdefender Virus Scanner, which simply scans through your files in order to uncover malware.
Unlike Windows antimalware apps, it doesn't install any system monitoring software that can slow the computer down. The best news is that Bitdefender Virus Scanner is free and very easy to use. Be aware that it also finds and reports Windows malware, though.
For example, scanning my system typically shows a handful of spam mail messages containing attachments into which Windows malware has been hidden. This can be alarming but is actually harmless and, generally speaking, Windows malware can be identified because the name of it usually begins with "Win32" or "Win64". Even though this is harmless to Mac users, Bitdefender Virus Scanner will still remove it.
In addition to Bitdeferender Virus Scanner, we also recommend the occasional use of Malwarebytes Antimalware, which focusses mostly on uncovering and removing adware - which is to say, hidden code within certain apps that aims to hijack your computing experience to show adverts on the desktop or in your web browser. Again, you can run Malwarebytes Antimalware infrequently to scan your system.
Enable two-step everywhere
Two-step authentication is a system whereby your login to services or websites requires more than just your username and password. It requires an additional numeric code. This is either sent to you as something like a text message or it's generated by a special app that runs on your mobile phone (there are many such apps but for the iPhone we recommend Authy).
Two-step verification is sometimes referred to by its more technical name of two-factor authentication, or TFA.
We discuss how to setup two-step verification for your Apple ID here, and we very, very strongly recommend you set it up because it presents an insurmountable brick wall to hackers trying to gain access to your account. In fact, stop reading this now and go and do it if you haven’t already. We'll wait here until you've finished.
Done it? Terrific. But now you should go off and enable two-step it for all the other sites and services you access. For example, if you use any Google services like Gmail then you can also enable two-step verification. You can enable it for Microsoft services and sites too, and for Dropbox.
Not all sites or services offer two-step verification just yet – notable hold-outs for UK users are Amazon and eBay - but a surprising number are on-board. Sites like https://twofactorauth.org provide a continually-updated list of those that do, although they tend to be biased towards American use.
Setting-up two-step verification is pretty easy. Some sites and services text you a number when you’re logging in, that you then enter when prompted, so to set them up all you need do is provide your mobile number.
For those services or sites that use an authenticator app, like the aforementioned Authy, you’ll need to switch to the app on your mobile or tablet, then choose to add a code and simply point the device’s camera at a barcode that the site displays when you opt for two-factor setup. It's pretty straightforward.
If your device doesn’t have a camera then you can type the auth code in manually, and usually it appears just below the barcode.
Subsequently logging in to the service once two-step verification is setup will involve opening the app and typing when prompted the code displayed (usually after you've entered your password), or waiting for the text message/voice call to arrive and typing it when prompted.
Encrypt web page look-ups
The ages-old Domain Name System, or DNS, converts the addresses we humans can read and remember - such as www.macworld.co.uk - into the numeric internet addresses that computers better understand, such as 188.8.131.52.
All computers connected to the Internet consult DNS servers. They’re provided by the Internet Service Provider as part of the overall package. The problem is that, like many things online, DNS is in no way secure.
It was invented in a different era, back when people just didn’t think about things like that. In other words, any and all requests you make for websites via DNS can be snooped upon by others while the data is in transit.
The DNSCrypt app and project overcomes this by simply encrypting DNS requests both to and from the DNS server. You can download the app from the project's home page and setup is pretty simple once it's installed - just open System Preferences, click theDNSCrypt icon at the bottom, then select the General tab and put checks alongside Enable DNSCrypt and Automatically Disable if Blocked. See our screenshot for an example.
You won't notice any difference to everyday internet tasks such as web browsing when DNSCrypt is in use, although it adds a menu bar icon so you don’t forget it's running (right-clicking this and selecting the hide option gets rid of this until you next reboot). However, with DNSCrypt running your web page look-ups are immediately more secure.
Use a VPN
Never assume your Mac is safe when using a shared network, whether that’s out and about in a café, or even in location such as an office. Unfortunately, it's extremely easy for malicious interests to spy on data you send to and from websites.
While out and about many people chose to utilise a virtual private network (VPN) service. This encrypts all data and routes it to an end point operated by the folks who run the VPN service.
Tasks such as browsing and downloading are entirely unaffected as far as the user is concerned, but anybody on the same physical network - such as another computer on the café's shared Wi-Fi service - is blocked entirely from snooping on your Mac’s data.
Because a VPN service encrypts your data, you can also it at home to overcome internet censorship imposed by the British government and ISPs.
A variety of companies offer VPN services and they're usually paid for via monthly subscription fees of around $5-$10. Just search Google and you'll find many examples. However, there’s been an increasing trend recently for some companies to offer lifetime subscriptions to their VPN services for a one-off fee of around $40. For the more casual user such deals are ideal.
For impartial and expert advice, try out article Best VPNs for Mac.
Typically, VPN services come with an app that you run when you want to make use of the VPN connection, although OS X/macOS comes with a built-in VPN tool that you can use instead - just open System Preferences, click the Network icon, then click the plus button at the bottom left beneath the list of connections.
In the dialogue box that appears, click VPN from the dropdown list alongside Interface, then select the service type from the list beneath (usually it's L2TP). Then click the Create button, and fill in the server/login details provided by the VPN service.
For historical reasons most data is transmitted on the web in plain form and this means anybody can eavesdrop at any stage of transit. The exception is secure connections such as those made to banks, webmail services and online shopping sites. These use secure HTTP, and you can tell because the website address starts with https://.
Wouldn't it make sense if every site used HTTPS? Making a website secure in this way is a bit more complicated and expensive than running a basic site but nonetheless there is a slow revolution happening and many sites are making the switch.
You could try adding an S to the middle of each web address - so that http://example.com becomes https://example.com. There's an https:// version of the Google home page, for example. However, an easier way if you're using a browser that isn't Safari - such as Chrome or Firefox - is to install the HTTPS Everywhere browser extension. This simply (and invisibly) consults a database of sites that have an optional https:// entrance and switches you automatically should you try to access one.
Alas, because of the way it works, a true HTTPS Everywhere extension for Safari is presently impossible to implement in a way that provides maximum security. Nonetheless, the SSL Everywhere extension brings something very similar to Apple's browser.
The only difference is that the initial data transmission when you access a site isn't encrypted, which can provide interested hackers or snoops with a little more information than is ideal. However, once you've been switched over to secure HTTP - which essentially happens immediately from the user's perspective - then everything is, of course, encrypted.
Check the certificate
Apple ramped up its warnings in relation to potentially risky web pages in Safari 11.
If you see a padlock next to the address in Safari's address bar, you can click on that to reveal information about the Certificate. In Safari 11, introduced in 2017, Apple improved the user interface for this information.
If you are running the latest version of Safari you should see better warnings - that make it clear if a connection is not private. The warning isn't as attention grabbing as the Chrome warnings mentioned above, but the warnings are there if you check.
Read our tips for using Safari on the Mac.
Make money spotting bugs
Perhaps making money isn't your first priority when protecting the security of your Mac. But if you should happen to discover a previously unknown vulnerability in one of Apple's systems while doing so, you could stand to earn up to $200,000.
The 'bug bounty' programme was announced at the Black Hat conference on 4 August 2016.
"We've had great help from researchers in improving iOS security all along," said Ivan Krstic, Apple's head of security engineering and architecture. "[But] we've heard pretty consistently... that it's getting increasingly difficult to find some of those most critical types of security vulnerabilities. So the Apple Security Bounty Program is going to reward researchers who actually share critical vulnerabilities with Apple."
$200,000 is the top reward, given to those who discover vulnerabilities in Apple's secure boot firmware components; for less critical flaws the bounties drop through a series of smaller figures to a bottom tier of $25,000. Wired has the details.
Admittedly, it's unlikely that amateurs will be first to spot a significant software flaw, but we imagine most Mac users will be pleased to hear that Apple has finally launched an incentive programme to encourage more widespread reporting of its vulnerabilities. Incentivising security researchers to let Apple know about a flaw instead of passing it on to hackers (which may still, sadly, be more lucrative) makes Apple products safer for everyone.
Want to improve your knowledge of MacOS? We have some Power User Tips for MacOS here.